Skip to content

How Human Hair Wigs Are Made and How to Choose the Right One

by Christine Swift 05 Nov 2026

How do you choose a wig that feels right for you? What makes a wig look natural and fit comfortably? How can you find a cap that follows the shape of your head without unwanted bulk? And what should you look for in a glueless wig?

The right wig is about more than its color or style. From the hair and cap construction to lace knotting, coloring and texture, each stage can influence how a wig looks, feels and fits into your daily routine.

In this guide, we take you inside the MILLIONWIG manufacturing process, from hair preparation to the final inspection. Along the way, we share the details worth looking at when you shop, so you can ask informed questions and choose a wig that suits your preferences.

Different cap constructions and styles may require different production arrangements. This article focuses on wigs made with a hand-knotted lace area combined with machine-made wefts.

Human hair wigs in different colors laid out for customer order inspection at the MILLIONWIG factory

How a MILLIONWIG Human Hair Wig Is Made

  1. Select suppliers and inspect incoming hair.
  2. Arrange root direction where needed and pre-treat the hair.
  3. Grade and store the hair, then prepare materials for each order.
  4. Make the cap and prepare hair for hand knotting and machine wefting.
  5. Bring the hand-knotted section and finished wefts together for assembly.
  6. Seal the knots and carry out in-process checks.
  7. Wash and condition the wig for the first time.
  8. Create texture, color and bleach knots as needed for the style.
  9. Wash and dry the finished wig.
  10. Inspect the wig before it is released from the warehouse, packed and shipped.

When a wig requires permanent texture, the sequence is: winding the hair → washing the curls → air-drying the curls → placing the wig in a drying cabinet.

When an order requires both perming and coloring, we create the texture first and color the hair afterward. Knots are then bleached where appropriate. 613 blonde wigs do not undergo knot bleaching.

MILLIONWIG human hair wig production flowchart, from incoming hair inspection through cap making, hand knotting, coloring and final inspection

1. Choosing and Inspecting the Hair

The making of a wig begins with the selection of its materials.

Before purchasing hair, we screen our suppliers carefully and work with established hair suppliers. The hair they provide is inspected, and only materials that meet our purchasing standards are accepted.

We use 100% human hair and offer Indian hair and Brazilian hair collections. Incoming inspections consider whether the material is human hair, whether synthetic fibers are mixed in, the condition of the cuticle, tangling, strand thickness, the presence of gray hair, tensile strength, moisture content, and fullness through the mid-lengths and ends.

Black hair bundles tied with yellow bands, labeled as Brazilian hair raw material for MILLIONWIG wig production
Testing hair tensile strength with a digital force gauge during MILLIONWIG material inspection

Fullness does not mean that the ends must be as thick as the roots. We look at the transition from the roots through the mid-lengths to the ends. If the mid-lengths or ends appear excessively thin, the material requires further inspection.

For each batch of incoming hair, we also take samples for a bleaching test and a seven-wash soaking test to observe the condition of the hair afterward. These are batch-sampling checks; they do not mean that every finished wig is bleached and washed seven times.

Only hair that passes the required checks is accepted into storage and used for production.

2. Root Alignment and Pre-Treatment

Why Does Some Hair Need Root Alignment?

The direction of the roots and ends matters when hair is prepared for wig making. Different forms of collected hair require different preparation.

The hair used in our Brazilian hair collection is cut in a whole bundle from the same provider. Its original root-to-tip direction is retained, so it does not require separate root alignment.

The hair used in our Indian hair collection comes from salons and other collection channels. Roots and ends may be mixed, which can increase resistance when combing, so the root direction needs to be arranged before further processing.

Indian hair being aligned with metal combing tools before pre-treatment at the MILLIONWIG workshop

Pre-Treatment: Balancing Manageability and Durability

After root alignment where needed, the hair goes through pre-treatment, including acid washing, a catalyst treatment, neutralization, washing and conditioning soaks. These treatments apply to the hair we use across our collections, including Indian hair and Brazilian hair.

During pre-treatment, we consider both the condition of the hair and the amount of cuticle structure retained. Retaining some cuticle structure can help support durability, while removing some of it is intended to improve smoothness and manageability and reduce tangling and frizz.

Finding a balance is an important part of our work. Through repeated trials and adjustments, we have developed treatment arrangements for the hair we use. Our aim is to improve manageability while retaining some cuticle structure and considering durability. The specific treatment arrangement varies with the hair material.

100% human hair describes the material. It does not mean the hair has never been processed. Our goal of retaining some cuticle structure does not mean that every cuticle remains intact. Root alignment and cuticle retention are separate considerations: aligned roots do not prove that the cuticle is intact.

Worker wearing red gloves checks water temperature with an infrared thermometer during hair pre-treatment

How a wig performs in daily use also depends on how often it is worn and how it is combed and cared for. For step-by-step washing instructions and texture-specific care tips, read the washing and care section of our extra-long wig guide.

3. Grading the Hair and Preparing Each Order

After pre-treatment, the hair is graded and placed in storage. Our team then prepares the materials needed for each order, taking into account the requested length, cap construction, color and texture.

Worker weighing black hair on a digital scale to prepare materials for a MILLIONWIG wig order

How Do We Measure Wig Length?

Different manufacturers may prepare and measure wig lengths differently. At MILLIONWIG, we consider the hair used for the hand-knotted lace section and the wefted section separately, then finish and measure the completed wig.

The Hand-Knotted Section: The Folded Return

When hair is hand-knotted through lace, part of the strand folds back. We call this the folded return.

For an 18-inch order, the folded return is 6–8 inches, and the hair prepared for the hand-knotted section is 24–26 inches long. After knotting, the longer side of the hair in the lace section is approximately 18–20 inches.

A longer folded return is one detail we consider during production. It helps reduce the appearance of short hairs sticking up around the top, creating a more natural-looking finish.

Diagram for an 18-inch wig order showing 24–26-inch hair before knotting, an 18–20-inch main length and a 6–8-inch folded return

The Wefted Section: Approximately Two Extra Inches

For the wefted section, we generally prepare hair at approximately two inches longer than the ordered length.

For example, for an 18-inch order, the weft hair is prepared at approximately 18 inches plus two inches.

Wefts are sewn into different positions from the upper part of the cap toward the back. Because their starting positions differ, hair of the same weft length may not fall into a natural-looking shape at the ends. Once the wig is assembled, the ends are arranged and trimmed to create a more natural outline and transition.

For an 18-inch order, small sections of hair at the top and back measure approximately 18 inches after finishing and trimming. This refers to measuring a small section of hair together, not measuring each individual hair separately. The folded return in the lace section is described separately above.

Measuring the Finished Wig

Using an 18-inch order as an example, we measure the length of a small section of hair together, rather than measuring each individual hair separately. The hairs within that section are not all exactly the same length, and the finished wig gradually becomes finer toward the ends.

For this example, the measured hair-section length is approximately 18 inches, while the overall length from the crown to the ends is approximately 22–23 inches. These are two different measurements.

To see our measuring method, watch our wig-length measurement video.

Watch how we measure a section of hair and the overall length of a 20-inch MILLIONWIG wig.

 

When shopping for a long wig, look beyond the stated length. Full-length photos and videos from the front, side and back can also help you see the transition through the mid-lengths and ends.

4. Cap Making, Hand Knotting and Wefting

A wig made with a lace section and wefts requires several workstations to come together.

Making the 3D Curved Cap

The cap is the foundation of a wig and an important part of how it feels to wear.

Our caps have a curved, three-dimensional construction, also known as a 3D cap. The curved shape is designed to follow the head and help reduce bulk caused by a poor fit, creating a more natural appearance.

A hand displaying sheer HD lace material for wig making, with rolls of lace in the background

The cap is made according to the order’s construction requirements, and the adjustment hooks are installed at this stage.

MILLIONWIG workers preparing adjustable straps and sewing wig caps in the cap-making workshop

Even a carefully shaped cap needs to be the right size. Measure your head using the seller’s instructions and refer to the size chart. If you have experienced gaps around the ears, a cap sliding backward or areas that lift away from your head, let us know before ordering.

MILLIONWIG Wig Cap Size Chart

Cap size Head circumference Front to nape Ear to ear across the top
XS 19.5–20.5 in 12.5–13 in 11–11.5 in
S 20.5–21.5 in 13–13.5 in 11.5–12 in
M 21.5–22.5 in 13.5–14 in 12–12.5 in
L 22.5–23.5 in 14–14.5 in 12.5–13 in
Wig cap measuring guide showing head circumference, front-to-nape and ear-to-ear measurements, with MILLIONWIG sizes XS–L in inches

We offer standard sizes and accept custom requests. If you need a particular size or cap shape, we can discuss the available options using the measurements you provide.

When shopping, you can also ask whether a cap has a 3D curved construction and request photos of the inside. The right size, a suitable cap shape and adjustable features all contribute to a comfortable, natural-looking fit.

Hand Knotting the Lace Area

Once the cap and the corresponding hair from our warehouse are ready, workers hand-knot the hair into the lace area.

There are different ways to knot hair through lace. A worker may place one hair or multiple hairs through a mesh opening. Single-hair knotting takes more time and can involve higher labor costs for the same hair weight, while the finer placement can help create a natural-looking distribution.

When shopping, look at both the knotting method and the density across the top. You can request close-up photos of the crown and part and ask how the hair is spaced—for example, whether a worker knots one opening and leaves one empty, or leaves several openings between knotted areas. Greater spacing can affect how much coverage the hair provides.

For our lace sections, we use one hair per knotted mesh opening, with a pattern of one opening knotted and one left empty. We also consider the overall density at the top to create a natural-looking distribution and suitable coverage. The visible result can vary with the part, lighting and how the wig is worn.

Close-up of a worker hand-knotting hair onto HD lace with a blue-handled ventilating needle

Different wig densities also create different looks. To compare 160%, 180% and 200% density, read our long human hair wig guide.

Machine-Making the Wefts

At the same time, the warehouse sends another portion of hair to the weft-making workstation, where a machine makes the hair into wefts.

Sewing machines stitching black hair into wefts at the MILLIONWIG workshop

Making a weft and sewing that weft onto a cap are two separate stages. Once the wefts and the hand-knotted section are ready, they come together for assembly.

5. Assembly and a Second Sealing Treatment

After hand knotting and weft making are complete, the cap, lace section and wefts are sewn together. Combs and an elastic band are installed during assembly; the adjustment hooks were installed earlier during cap making.

Worker sewing the lace section and hair wefts together during MILLIONWIG wig assembly

We seal the knots during production. When the wig reaches the semi-finished stage, we apply a second sealing treatment across the wig. This step is intended to help secure the hair connections for later wear, washing and combing.

We also carry out sample shedding tests on finished wigs and use our testing and production experience to refine the sealing process. A second sealing treatment does not mean that a wig will never shed, but it is one of the steps we use to address hair security.

When shopping, you can ask the seller: Has this wig received a second sealing treatment? In our experience, the additional treatment helps secure the hair, though actual shedding can also depend on construction, washing, combing and wear.

Gentle care remains important. To learn how to wash and comb a wig while reducing unnecessary pulling, read our wig-care guide.

After sealing and the relevant in-process checks, the wig moves to its first wash and conditioning.

6. The First Wash and Conditioning

After assembly, sealing and in-process checks, the wig receives its first wash and conditioning.

This stage primarily removes dust that may have collected during production and conditions the hair before any order-specific styling work.

Worker washing wigs in a stainless steel basin and gently detangling the hair with a wide-tooth comb

7. Creating Texture, Color and Bleached Knots

Different styles call for different colors and textures. Once the wig’s basic construction is complete, we arrange texture creation, coloring and knot bleaching according to the style and order.

Not every wig requires every step. When both perming and coloring are needed, we create the texture first and color the hair afterward. Knot bleaching follows where appropriate. 613 blonde wigs are not knot-bleached.

Temporary Styling and Permanent Texture

Understanding how a texture is made can help you choose a style that fits your routine.

Temporary texture is mainly created with heated tools, such as a flat iron or curling iron. During styling, we keep the temperature at 220°C / 428°F or below. After washing, temporary waves or curls gradually return to the hair’s natural straight state. You can then style the wig again.

If you style the wig yourself with heat, make sure the hair is completely dry and use a suitable heat protectant. Start with a low setting and use the lowest temperature that achieves your desired style. Follow the care instructions for your specific wig, especially if the hair has been lightened, colored or permed. Repeated high heat can increase dryness and alter the wave or curl pattern.

Permanent texture is made through a dedicated texture-creation process. After refining our method, we tested different curl patterns within our permanent curly range, with each tested pattern undergoing 20 washes. In these factory tests, the tested samples retained their curl pattern without obvious loosening.

These tests covered permanent curly textures only. Permanent body wave and other wavy textures were not included, so the results do not establish their performance after 20 washes. Everyday results may vary with washing, care and styling methods.

Texture is one of the areas we pay close attention to. We want you to enjoy the look when your wig arrives and throughout your regular washing and wear.

You can watch our factory’s curl-washing test to see how we observe the texture after repeated washing.

For wigs requiring permanent texture, the production sequence is:

Wind the hair → wash the curls → air-dry the curls → place the wig in a drying cabinet.

 

The drying cabinet used during texture creation is a separate stage from the drying that follows the final wash.

Permanent texture does not mean a curl can never change. Washing, combing, styling and daily care can all affect its appearance. Ask about the care requirements for your chosen style and read our curl-care guide for more information.

Hand Coloring: Color Made One Wig at a Time

Coloring is one of our factory’s areas of focus and an important part of our work.

There are different ways to color hair for wigs. Batch coloring can color a quantity of hair at the same time, helping keep a batch consistent and save production time. Styles that need controlled color placement—such as gradients, highlights and two-tone designs—require more detailed work according to the design.

In some batch-dyeing processes, when the hair and cap are colored together, dye may also reach the lace and cap. At MILLIONWIG, our colorists work on each colored wig individually, using a method similar to coloring hair in a salon and taking care to avoid dyeing the lace and cap.

We pay attention to both the hair color and the appearance of the lace and cap, helping create a more natural-looking result when the wig is worn.

Hand coloring takes more time, but it allows the colorist to work carefully on the placement of gradients, highlights and two-tone designs. If you have a reference photo, you can send it to us. We will discuss the available approach based on the hair, the target color and the production conditions.

Colorist wearing gloves applies dye with a brush to a sectioned wig on a mannequin head

We also pay attention to how color performs after washing. Different hair collections are suited to different color ranges:

  • Brazilian hair collection: suitable for dark and light colors, including blonde, light blonde and very pale shades.
  • Indian hair collection: better suited to dark colors. Because of the characteristics of the hair, light-color results may not be as suitable as those achieved with Brazilian hair.

Our light-colored products therefore use the Brazilian hair collection. For dark colors, you can consider either collection according to your preferences and budget.

Custom Color from a Reference Photo

If you would like a custom color, we use your reference photo as a guide for the overall shade, depth and color placement. The finished result may differ because the starting hair color, previous processing, photography, lighting and screen settings can all affect the outcome or how the color appears. An exact match to a photo cannot be guaranteed.

If a particular shade, depth or highlight placement matters to you, tell us before production. This helps our colorist understand the result you have in mind.

Colors Shown on Our Website

For colored styles shown on our website, a dedicated inspector checks the finished color against the order requirements and the overall look shown in our product photos before release. We aim for a consistent overall appearance, while allowing for slight differences between individually hand-colored wigs.

Each colored wig is worked on by hand. In highlighted styles, the position of every individual highlighted strand will not be exactly the same from one wig to another. Color may also look slightly different under different lighting.

We aim to keep the overall style shown in the product photos while allowing each hand-colored wig to have its own details. Before buying, look at real photos or videos to see the color from the roots through the mid-lengths and ends.

Bleached Knots and a Natural-Looking Hairline

A natural-looking hairline and carefully treated knots are details we focus on, and they are important considerations for many lace-wig shoppers.

Where appropriate for the style, we bleach the knots and refine the hairline to create a natural-looking appearance around the lace edge and part.

Side-by-side close-ups of a MILLIONWIG wig showing bleached knots along the part and a natural-looking hairline

In our Brazilian hair collection, knots are usually less visible after bleaching, creating a natural-looking part.

With our Indian hair collection, some knots may still be visible because of the characteristics of the hair. After knot bleaching and hairline refinement, the overall appearance can still look natural.

Side-by-side close-ups of Indian hair and Brazilian hair wigs showing bleached knots, center parts and HD lace hairlines

You can also request close-up photos of the part, hairline and lace edge to decide which appearance you prefer.

613 blonde wigs are not knot-bleached. Knot-bleaching service is available for other colors. You can confirm the arrangement for your chosen style before ordering.

Recoloring and Restyling Your Wig

MILLIONWIG wigs are made with 100% human hair and offer options for further coloring and restyling. Suitable changes depend on the hair collection, its current color, any previous processing and the condition of the hair. Before recoloring, adding highlights or changing the texture, contact us or consult a professional hairstylist about your specific wig.

The result can be affected by the hair type, color and treatments it has already received. If you want to make a major color change—particularly to hair that has already been lightened, colored or permed—review suitable guidance first. You can also contact us for advice about your chosen style.

Temporary waves and temporarily straightened styles can be restyled according to your preference. If you want to change a permanent texture, first learn how to straighten it before creating the new style. You can consult online tutorials, contact us or speak with a professional hairstylist about an appropriate method.

Both our Indian and Brazilian hair collections support further coloring, but we do not recommend lightening Indian hair to pale shades. Before coloring or adding highlights, review suitable instructions and control the processing time to help avoid damage. You can contact a local hair salon or ask us for advice about your wig.

Care for your wig as you would your own hair: use appropriate conditioner and care products, and wash and comb gently. Good care can help maintain the condition of the hair and support a longer useful life.

8. Final Wash, Drying and Inspection

After the remaining production steps are complete, the wig receives its final wash and is dried before the final inspection.

MILLIONWIG workers inspecting wigs at workshop tables, with mannequin heads and styling tools nearby

The final inspection considers:

Inspection item What we check
Hair tensile strength The tensile performance of the finished hair
Color Whether the finished color matches the order
Color evenness The coloring in relation to the style’s intended color placement
Mid-length and end fullness The transition and any excessively thin areas
Length The finished length
Shedding The condition of the hair after production
Texture Whether the texture is appropriate for the style

Only after the wig passes inspection is it released from the warehouse, packed and prepared for shipment.

Checks take place at different points—from incoming hair and sealing to the finished wig—because each stage focuses on different details.

9. How to Choose the Right Human Hair Wig

Understanding how wigs are made can help you compare the details that matter most to you.

Understand the Hair and Its Treatments

“100% human hair” tells you what the hair is made of; it does not mean the hair has never been treated. Ask what processing the hair has undergone, whether the seller can explain its cuticle condition, and what to consider before recoloring, heat styling or perming.

MILLIONWIG wigs support further styling and coloring. Temporary styles can be straightened or curled again, while a permanent texture may need to be straightened before a new texture is created. For major changes, review suitable guidance or consult us or a professional hairstylist first.

Both our Indian and Brazilian hair collections can be colored again, although we do not recommend lightening Indian hair to pale shades. Control processing time and consult a local salon or contact us if you need advice.

Measure Your Head and Check the Cap

A comfortable fit starts with the right size. Measure your head according to the seller’s instructions and look at the inside of the cap, including the elastic band, adjustment straps and combs.

You can also ask whether a cap has a 3D curved construction. A curved shape can help the cap follow the head, but comfort also depends on your measurements, head shape and preferences.

“Glueless” does not mean that every wearer will need no adjustment. Adjustable features can help improve the fit, but they do not replace the right cap size.

Choose the Lace Area for Your Parting Habits

If you prefer a simple, relatively fixed part, a 2×6 HD Lace Closure may suit you. A 5×5 HD Lace Closure provides more room for parting, while a 13×6 HD Lace Front offers a wider area across the front for styling.

Check the configuration on the individual product page. A larger lace area is not automatically better for everyone; your parting habits, styling needs and budget matter too.

Look at Full Length and the Ends

Do not compare wigs using density percentages alone. Request full-length photos from the front, side and back, and look at the transition from the mid-lengths to the ends.

Manufacturers may measure length differently, so two wigs labeled with the same length can arrive looking different. Before buying, ask:

  • How is the wig measured?
  • Does the stated length refer to a measured section of hair or the overall distance from the crown to the ends?
  • Does the transition through the mid-lengths and ends suit the look you want?
  • Can the seller provide full-length photos or videos?

When comparing photos, choose similar lengths, textures and camera angles whenever possible.

Check the Hairline and Knots

Ask for close-up photos of the hairline, part and lace edge. Find out whether the hairline has been pre-plucked and how the knots are treated.

At MILLIONWIG, 613 blonde wigs are not knot-bleached; knot-bleaching service is available for other colors. Brazilian hair knots are usually less visible after bleaching, while some knots may remain visible with Indian hair. Look at actual product photos and choose the appearance you prefer.

Consider Your Care Routine

Straight, wavy and curly wigs—and different colors—may need different amounts of attention. Think about how much time you want to spend washing, combing and styling.

For waves and curls, ask how to restore the style after washing. If you plan to use heat, check the instructions for your wig before styling.

Compare Similar Specifications and Services

When comparing prices, look for similar lengths, densities, lace constructions and color treatments.

Before ordering, check the production time, sizing, available customizations and the seller’s actual after-sales terms. Ask about the conditions before making irreversible changes such as cutting the lace or dyeing the hair.

The right wig is not necessarily the one with the highest specification in every category. Look for clear information about the hair, a suitable construction, an appearance you enjoy and a style that fits your care routine.

Frequently Asked Questions

Does 100% human hair mean the hair has never been processed?

No. “100% human hair” describes the material. It does not mean the hair has never been processed or chemically treated, or that every cuticle is intact. Hair goes through pre-treatment and may also be colored or textured according to the style.

Does aligned root direction mean the cuticle is intact?

No. Root alignment and cuticle retention are separate considerations. Root direction alone cannot establish whether the cuticle is intact.

Are all wigs completely hand-knotted?

No. This article mainly describes wigs with a hand-knotted lace area and machine-made wefts that are assembled together.

We also accept fully hand-knotted, 360 HD Lace and 9×6 HD Lace orders. A fully hand-knotted wig does not use machine-made wefts; the hair is hand-knotted throughout the cap. Other styles that combine lace and wefts follow a process similar to the one described here. Confirm the construction and available options before ordering.

Does every wig go through perming, coloring and knot bleaching?

No. These steps depend on the style and order. If both perming and coloring are required, texture is created first and coloring follows. Knot bleaching is then carried out where appropriate. 613 blonde wigs are not knot-bleached.

Why are there two washes?

The first wash and conditioning follow assembly, sealing and in-process checks. They primarily remove production dust and condition the hair.

After the later production steps are complete, the wig is washed and dried again before final inspection. The drying cabinet used during texture creation is a separate stage from drying after the final wash.

Is every finished wig given the seven-wash test?

No. The bleaching test and seven-wash soaking test are carried out on samples from each batch of incoming hair, not on every finished wig.

Should the ends always be as full as possible?

That depends on your preference. Some people like fuller ends; others prefer a lighter, more gradual transition. Look at full-length photos or videos and choose the appearance you enjoy.

Will an inspected wig never shed or tangle?

No process can promise that. We check for shedding during production and final inspection and consider manageability during pre-treatment.

Gentle washing and combing can help reduce pulling and the likelihood of excessive shedding or tangling. Daily results also depend on wear and care. Read our wig-care guide for washing and maintenance advice.

Choose with More Confidence

A wig’s appearance and fit depend on several details working together: the hair, cap, lace area, assembly and finishing.

Once you understand these details, you can ask more useful questions before buying. Does the cap fit your measurements? Does the lace area suit the way you part your hair? Do you like the transition at the ends? Are there clear photos of the color and texture? Which details can be customized?

To learn more about our story and factory, visit Our Story. You can also explore our current styles or contact us to discuss available lengths, colors and cap options.

Prev Post
Next Post

Thanks for subscribing!

This email has been registered!

Shop the look

Choose Options

Recently Viewed

Edit Option

Have Questions?

Back In Stock Notification

this is just a warning
Login